Braun IRT6020 ThermoScan 5 Ear Thermometer
Ultra soft and gentle tip is warmed up to 34°C for enhanced accuracy and extra comfort Ultra soft and gentle tip is warmed up to 34°C for enhanced accuracy and extra comfort. The lens filter indicator will blink to signal one is needed. To achieve accurate measurements, make sure a new, clean lens filter is in place before each measurement. Attach a new lens filter by pushing the thermometer probe straight into the lens filter inside the box and then pulling out. Note: The Braun ThermoScan will not work unless a lens filter is attached. Braun ThermoScan measures the infrared heat generated by the Eardrum and surrounding tissues. To help avoid inaccurate temperature measurements, the probe tip is warmed to a temperature close to that of the human body. When the Braun ThermoScan is placed in the ear, it continuously monitors the infrared energy. The measurement is finished and the result displayed when the thermometer detects that an accurate temperature measurement has been taken.
The probe tip is the most delicate part of the thermometer. It must be clean and intact to ensure accurate readings. If the thermometer is ever accidentally used without a lens filter, clean the probe tip as follows:
- Very gently wipe the surface with a cotton swab or soft cloth moistened with alcohol. After the alcohol has completely dried out, you can put a new lens filter on and take a temperature measurement.
- If the probe tip is damaged, please contact Consumer Relations.
- Use a soft, dry cloth to clean the thermometer display and exterior. Do not use abrasive cleaners. Never submerge this thermometer in water or any other liquid. Store thermometer and lens filters in a dry location free from dust and contamination and away from direct sunlight.
- Additional lens filters (LF 40) are available at most stores carrying Braun ThermoScan.
Probe cover protection cap
21 x Lens Filters